
Purchased for a somewhat large(to me) refurbishing project to prep computers for some distributed password auditing. Used it on ten machines without a hitch on a single one. None of them have overheated or shown any signs of over heating issues. They've been full bore for about a month now and performing beautifully with his product.

Works as it should

it was in a tube like every other small amount of paste typically is, which is easy to handle and apply. the temperature of a 14700kf set to 5.7ghz on power cores, 4.3 on efficiency cores and ring ratio set to 4.8ghz at 1.315v never exceeds 75 degrees celcius in gaming while multitasking on discord and browsers running a few tabs as well as OBS background recording.

Fantastic heat transfer. Easy to apply. None conductive. Some of the absolute best on the market to date.

-Fast to apply -mess free -cools quickly and efficiently

Title really said it all.

- The wipes are very efficient in cleaning old paste off of cpu's and the cooler - 1 wipe is enough to clean both the cpu and the cooler (you get 3 which is good) - The paste applies easily on the cpu with no issue.

Dropped temps by 8-10c


Awesome Thermal Conductivity & lower temps, easy application

- It keeps your gear cool

Why did I pick this? I was intrigued by this so I bought it. Sure, its pricier than most pastes. There is a thick plastic side and a thin plastic side. I cut the piece to size and used a sharp utility knife to pre-peal the thin plastic side and fold the corner. I wiped the die with the enclosed alcohol pad, pealed the thick plastic side, centered the pad, used the spatula to press it down and then grabbed the pre-folded edge of the thin plastic to remove. It wasnt too bad. I dont know if it works better as I have not compared it to regular thermal paste but I am satisfied that I got an appropriate amount between the CPU and the cooler.

kept my i7 12700k under 100 Fahrenheit (cold) while under 100% load, after a week of use, it cooled down to 70-85 Fahrenheit IDLE!

-Easy to snip to size -Excellent thermal properties; performs brilliantly

Used with a Ryzen 7 9700x and EK AIO. - Precut to AM5 size so: a quick dot of included silicon lube for super easy placement a quick tighten of the air and I was done - Consistently 2 to 5 C cooler at idle than my last 2 paste jobs - Consistently 5 to 10 C cooler under load


Thermals dropped 3° to 10° C on average over the previous, more well known name-brand stuff i was using. came with spreader, brush and a couple finger cots.

Non conductive No Curing Time

It's a good idea to keep extra's of this around. I try to clean and reapply Thermal Paste once a year.

-Great performance. My CPU temp is around 28C at idle and caps out at 63C under sustained stress testing =O. Using a Cooler Master Hyper 212 cooling tower. Maybe I went overboard because the Ryzen 5 5500GT isn't the spiciest processor out there... but I can't say I regret it. -Included plastic spatulas and cleaning wipes were very helpful. Mixed results with the applicator tip.