Your Browsing History
S$22.55
GST-Inclusive Price
Ships from Hong Kong.
Most customers receive within 10-17 days.
Sold by SongFengQiaoMaoYiShangDian
Shipped by SongFengQiaoMaoYiShangDian
Meet Your Seller
Professional 3D Printer CNC-V3.0 -Shield Expansion Board A4988 Driver Step Motor
- Professional 3D Printer CNC-V3.0 -Shield Expansion Board A4988 Driver Step Motor
+
+
Overview
Specs
Reviews
Features:
Stable performance A4988 Driver Chip is low power consumption and will not be too hot during use. The performance is more stable than chip.
. 0- GRBL 0.8 -c compatible. (Open firmware- running on UNO- can convert G-code-commands into step signals
4-axis support (X, Y,, a can copy X, Y, or create a 4-axis firmware- using pins- D12 and D13); 2 endpoints per axis- (total of 6)
Adopting a movable Pololu- A4988 compatible stepper driver. (A4988, DRV8825, and others)
Jumpers- set microsteps for stepper drivers-. (Some drivers-, such as DRV8825, can execute -1/32 microsteps)The stepper motor can be connected- to a 4pin-Molex connector or welded in place
Operates on 12-36V DC-power. (Currently, only the Pololu-DRV8825 driver can handle voltages up to 36V, so please consider the working voltage- when supplying power to the circuit board. )
Item: 3D Printer Accessories
with: CNC- V3+UNOR3 +A4988 Driver+ Stepper Motor
Power: DC12-36V
Package Includes:
1 x CNC-Shield. 0-
1 x UNOR3 Board
4 x Motor Wires
4 x A4988 Red
4 x 17HS4401S Stepper Motor
1x USB Cable
Note:
Please allow 1-2cm errors due to manual measurement, please make sure that you do not mind before you order.
Due to the difference between different monitors, the picture may not reflect the actual color of the item.
Stable performance A4988 Driver Chip is low power consumption and will not be too hot during use. The performance is more stable than chip.
. 0- GRBL 0.8 -c compatible. (Open firmware- running on UNO- can convert G-code-commands into step signals
4-axis support (X, Y,, a can copy X, Y, or create a 4-axis firmware- using pins- D12 and D13); 2 endpoints per axis- (total of 6)
Adopting a movable Pololu- A4988 compatible stepper driver. (A4988, DRV8825, and others)
Jumpers- set microsteps for stepper drivers-. (Some drivers-, such as DRV8825, can execute -1/32 microsteps)The stepper motor can be connected- to a 4pin-Molex connector or welded in place
Operates on 12-36V DC-power. (Currently, only the Pololu-DRV8825 driver can handle voltages up to 36V, so please consider the working voltage- when supplying power to the circuit board. )
Specifications
:Item: 3D Printer Accessories
with: CNC- V3+UNOR3 +A4988 Driver+ Stepper Motor
Power: DC12-36V
Package Includes:
1 x CNC-Shield. 0-
1 x UNOR3 Board
4 x Motor Wires
4 x A4988 Red
4 x 17HS4401S Stepper Motor
1x USB Cable
Note:
Please allow 1-2cm errors due to manual measurement, please make sure that you do not mind before you order.
Due to the difference between different monitors, the picture may not reflect the actual color of the item.
Warranty & Returns
Warranty, Returns, And Additional Information
Return Policies*
- Return for refund within: 30 days
- Return for replacement within: non-replaceable
- This item is covered by SongFengQiaoMaoYiShangDian Return Policy
- *Subject to applicable law
Warranty Notice:
This product does not include manufacturer warranty when purchased or used outside of its designated sales region. By purchasing internationally, you acknowledge that warranty support from the manufacturer will not be available.
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...