Your Browsing History
- In Stock
Quick View
En-Labs ENU325SSDHTS 2.5" USB 3.0 HDD SATA External Hard Drive Disk Enclosure Case Box Support UASP for 7 & 9.5mm SATA I/II/III SSD and HDD
- Type: Enclosure
- Maximum Capacity (per Bay): Up to 1TB
- Features: Slim aluminum 2.5" USB 3.0 HDD SATA External Hard Drive Disk Enclosure SATA III to USB 3.0 enclosure,Super Speed USB3.0 offer Speed up to 5Gbps, Ten times of USB2.0 UASP enclosure, 20% faster than traditional USB 3.0, lower CPU utilization Compatible with 7mm~ 9.5mm slim 2.5 inch SATA I,SATA II
- Package Contents: 1 x 2.5 inch HDD Enclosure 1 x 1.64ft USB Data Cable 1 x Screwdrive 1 x Screws package
- Model #: ENU325SSDHTS
Quick View
EnLabs FP525U27M PC Case 5.25 inch front panel 7 Ports USB 2.0 USB Hub w/ SATA 15pin Power Connecor(USB 2.0 9pin Connector & 2ft Adapter Cable)
- Type: USB
- Standards: USB 2.0
- Ports: 7 x USB 2.0
- Transfer Rate: 400/480Mbps
- Model #: FP525U27M
Quick View
Tool Free 5.25-Inch CD-ROM Space HDD Frame/Mobile Rack Converter Enclosure for PC Case,fit 3.5" SATA Hard Drive Disk installation
- Color: Black
- Conversion Tray: 1 x 3.5" Drive to 5.25" Bay
- Mobile Rack Drives Support: 1 x 3.5" Drives to 5.25" Bay
- Mobile Rack Interface: SATA I/II/III
- Model #: RACK-HDD-3.5TO5.25
Quick View
10pcs/lot Aluminum Heatsink 20x20x6mm Electronic Chip Cooling Radiator Cooler for IC MOSFET SCR Heat Sink Extrusion Fins
- Color: Silver
- Compatibility: Motherboard Chipsets
- Features: Product Description Aluminum IC heatsink for power transistor, FET, IC, power amplifier, Voltage Regulator, MOSFET, SCR, etc Use heatsink adhesive glue to install heatsink on the IC.Glue is not included here. Size is 20x20x6mm,Please check your component dimension carefully,and make sure size of the heatsink fits it no problem. Specification Product Name: Heatsink Material: Aluminium Color: Silver Tone Overall Size: 20mm x 20mm x 6mm Weight: 35g Package Content: 10pcs x Heatsink
- Dimensions: 20mm x 20mm x 6mm
- Model #: 11-001-258
Quick View
10pcs/lot 20x20x1.0mm DIY Copper Shim Heatsink thermal Pad Cooling for XBOX360 PS2 3 4 BGA CPU VGA Chip RAM Memory chips IC Cooler Heat sink
- Compatibility: CPU
- Features: This Copper Shims thermal conductivity up to 401w / mk, and ordinary copper thermal conductivity is only 20-30w / mk CPU and GPU graphics card in the inside part of the laptop using a thermal plastic thermal conductivity, thermal plastic at high temperature for a long time easy to aging, and ultimately lost, leading to overheating of the CPU or GPU, the Laptop will not start after overheating. With this copper pad to greatly lower gpu temperatures, can be used for graphics, northbridge, CPU chips. It can be used as heatsink solution for Xbox ,PS4 and all laptop and computer such as HP,Dell,Acer,Thinkpad etc. Package included: 10 pcs Thermal Conductive Copper Shims 20mm x 20mm x 1.0mm
- Dimensions: 20mm x 20mm x 1.0mm
- Model #: 11-001-272
Quick View
Enlabs PVCFL8CM10PK 80 mm Black PVC Mesh Dust Filter PC Cooler Fan Filter Dustproof Computer Case Cover,10 Pack
- Colors: Black
- Specifications: Material: PVC Color: Black Dimension:80 x 80mm/3.15 x 3.15"(L x W) Note: Installation screws are not included. Package Included: 10 x Dust Filter Mesh
- Color: Black
- Option: N/A
- Model #: PVCFL8CM10PK
Quick View
Enlabs PVCFL12CM10PK 120 mm Black PVC Mesh Dust Filter PC Cooler Fan Filter Dustproof Computer Case Cover,10 Pack
- Colors: Black
- Specifications: Material: PVC Color: Black Dimension:120 x 120mm/4.72 x 4.72"(L x W) Note: Installation screws are not included. Package Included: 10 x Dust Filter Mesh
- Color: Black
- Model #: PVCFL12CM10PK
Quick View
Enlabs PVCFL14CM10PK 140 mm Black PVC Mesh Dust Filter PC Cooler Fan Filter Dustproof Computer Case Cover,10 Pack
- Specifications: Material: PVC Color: Black Dimension:140 x 140mm/5.51 x 5.51"(L x W) Note: Installation screws are not included. Package Included: 10 x Dust Filter Mesh
- Color: Black
- Model #: PVCFL14CM10PK
Quick View
10 Sets/30pcs CPU RAM LAN Aluminum Heatsink Cooler,Mini PC Raspberry Pi 2, Raspberry Pi A A+, Raspberry Pi B B+ Radiator Cooling
- Color: silver
- Compatibility: CPU
- Features: These heatsinks have a layer of thermal adhesive that allow for easy installation on to your board. These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases. Tested to fit the Raspberry Pi CPU / SoC; Reduce the risk of hardware failure due to overheating. These pure aluminum heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. These heat sinks can be used with other devices such as the Beaglebone to cool processor, regulators, etc. Installation Instructions: -Make sure the chip modules are free from dirt and grease. -Peel the protective liner off on the base of the heatsink. -Apply the heatsi...
- Model #: 11-001-255(10)
Quick View
10pcs/lot 15x15x0.3mm DIY Copper Shim Heatsink thermal Pad Cooling for Laptop BGA CPU VGA Chip RAM Memory chips IC Cooler Heat sink
- Compatibility: CPU
- Features: This Copper Shims thermal conductivity up to 401w / mk, and ordinary copper thermal conductivity is only 20-30w / mk CPU and GPU graphics card in the inside part of the laptop using a thermal plastic thermal conductivity, thermal plastic at high temperature for a long time easy to aging, and ultimately lost, leading to overheating of the CPU or GPU, the Laptop will not start after overheating. And this copper heat sink solve thermal problems caused by frequent crashes laptop, etc Package included: 10 pcs Thermal Conductive Copper Shims 15mm x 15mm x 0.3mm
- Dimensions: 15mm x 15mm x 0.3mm
- Model #: 11-001-266
Quick View
EnLabs Ethernet Network RJ45 Coupler,Cat7/Cat6/Cat5e Ethernet Cable Shielded Extender Adapter Female to Female w/ Thunder & Lightning Protection
- Color: Black
- Package Content: Network Coupler
- Style: N/A
- Model #: TLPRJ45FFBK
Quick View
5 Sets/10pcs Raspberry Pi B+ Pi 2 Pi 3 Anodized Black Aluminum Heat Sink Radiator CPU RAM cooler,LAN cooling (2 Heatsinks/Kit)
- Color: Black
- Compatibility: Motherboard Chipsets
- Features: These heatsinks have a layer of thermal adhesive that allow for easy installation on to your board. Just peel and stick. Reduce the risk of hardware failure due to overheating. Installation Instructions: Make sure the chip modules are free from dirt and grease. Peel the protective liner off on the base of the heatsink. Apply the heatsinks to the corresponding chip modules and apply firm pressure. Package Includes: 1x 14mmx14mmx7.5mm Aluminum Heatsink for Raspberry pi 2B CPU chipset 1x 8.8mmx8.8mmx5mm Aluminum Heatsink for Raspberry pi 2B LAN chipset
- Dimensions: 1x 14mmx14mmx7.5mm CPU chipset 1x 8.8mmx8.8mmx5mm LAN chipset
- Model #: 11-001-200
Quick View
2pcs/lot Anodized Black Aluminum Heatsink 35x35x10mm CPU Southbridge IC Transistor chip Cooling Radiator Cooler w/ Screws
- Color: Black
- Compatibility: Motherboard Chipsets
- Features: Product Description Aluminum IC heatsink for PC Chipset power transistor, FET, IC, power amplifier, Voltage Regulator,Computer VGA Northbridge Southbridge etc. Use heatsink adhesive glue to install heatsink on the IC.Glue is not included here. Use Screw to install the heatsink. Specification Product Name: Heatsink Material: Aluminium Color: Anodized Black Overall Size: 35mm x 35mm x 10mm Weight: 35g Package Content: 2pcs x Heatsink
- Dimensions: 35mm x 35mm x 10mm
- Model #: 11-001-262
