

- I think they're pretty quiet and they run up and down pretty good. - I configured them to run between 85% to 100% on a sloped curve. - I needed for both back and front case fans and to help move air. - They're nice looking yet they're in sealed cases, yet nice looking. - They also came with the new (case) fan screws, and thank you.

It came with two icue cables The fans were already put together. Just had to make sure of direction, easiest fan installation ever. You do have to keep in mind if you are front mounting this three pack, one side has the connector direction, and where your connecting point will be.


These fans are quite and render true colors and easily controlled by the iCue app.

Easy to install, VRM is a nice addition to coolers, pump is quiet running around 80%, fans are quiet most of the time. Good fans on this, rgb if you want it - personally I set it pretty dim greenish~blueish and it's not too bright or annoying. Fan, pump, and rgb connectors can be run thru the tube separators for a cleaner look. Definitely seems to be keeping things cool, I do have a contact frame and Kryosheet instead of paste as well.


Very quite operation for a vertical install in an OC system.

I have used the T30 120 for years on my watercooled builds for radiators and and for air cooling . I expect these to work as great as the 120s . Happy to finally have them in 140s so I can upgrade to the 420 mm radiators for my upgrade build Lian li 011 evo XL Msi Meg X870e Godlike Amd 9950x3d Msi RTX 5090 Suprim SOC with alphacool gpu waterblock These T30 140 fans 2 Alphacool 45 mm 420 mm radiator 1 Corsair X5 420 mm radiator Alphcool water pump used for years great pump Optmus AM5 signature V3 cpu waterblock

-Solid copper faceplate with no screw holes -Magnetic cover plate to obscure mounting point over CPU -Vivid LCD screen -Easy install as a first-time AIO user

Easy to install. The one piece fan made install a breeze. Mounting the heat sink block was easy as well. Detachable LCD was easy on and off. The heat sink block fan did cool the surrounding area.

Blows air onto the motherboard to circulate air among VRMs and nearest RAM socket. Also the M.2 card on the Asrock B450M Pro4 mainboard. Those components stayed at ambient temparture (30C/86F). Kept overclocked Athlon 200GE (3.85GHz) at 60C/140F under 100% load from Prime95. Covers 100% of processor surface area.

The LCD display looks great not a secondary monitor but a independent screen

Works as it should.



Works great

Very high air flow. Seemingly strong Frame/shroud.

Easy to install , work great with My msi mother board no connectivity issues

Installation instructions are clear and simple enough Good cable lengths to reach the MB CPU fan headers Includes thermal paste So far it is able to keep up with my CPU's head (AMD Ryzen 7 9700X) with no issues